DG Set Operations & Maintenance

Auxiliary Power & Captive Generation

Mission-Critical Standby Power.
Instantaneous Changeover & Load Stability.

In high-availability environments such as multi-tenant IT parks, BFSI data centers, hospital ICUs, and automated manufacturing lines, an unexpected utility blackout cannot result in even a momentary interruption to critical equipment. Totalcare FM Solutions delivers complete Operations & Maintenance (O&M) for diesel generator (DG) infrastructure, ensuring 100% first-crank starting reliability and zero-latency power transfer.

Our mechanical and electrical engineers manage single and multi-unit synchronized DG installations from 250 kVA up to 3000+ kVA. We oversee Auto Mains Failure (AMF) automation, automatic synchronizing units (ASU), motorized bus couplers, and scheduled OEM 'A', 'B', and 'C' check maintenance cycles. Combined with automated day-tank fuel telemetry and CPCB-IV+ acoustic emission compliance, we protect your enterprise from grid instability 24 hours a day.

Heavy-Duty Diesel Generator Set Operations and AMF Control
⚡
< 15 Sec Emergency Blackout Transfer
🎯
100% First-Crank Starting Reliability
🏭
50+ MVA Captive Standby Power Governed
🛡️
99.99% Emergency Continuity Record

Engineering Methodology

Three Pillars of DG Set Operations & Maintenance

A rigorous electro-mechanical maintenance protocol designed to guarantee engine health, instantaneous synchronism, and fuel reliability.

AMF Control Panel and Automatic Synchronization

AMF Automation & Load Synchronization

Auto Mains Failure (AMF) logic testing, motorized changeover breakers, phase angle synchronizers for multi-engine banks, and programmable PLC priority load shedding during partial outages.

Diesel Engine Scheduled Preventive Maintenance

Engine Overhaul & 'B' / 'C' Checks

Lube oil replacement (15W40 CI-4+), spin-on fuel and bypass oil filters, DCA4 coolant corrosion conditioning, valve lash adjustment, turbocharger boost checks, and battery bank impedance testing.

Diesel Fuel Storage Quality and Acoustic Canopy

Fuel Quality & Acoustic Canopy Care

Underground bulk fuel storage inspections, day-tank automated fuel filtration to eliminate microbial sludge, vibration damper isolation, and acoustic attenuation maintenance meeting CPCB norms.

Smart Instrumentation & Remote Telemetry

Where Standby Generation Meets IoT Telemetry & Load Testing

Totalcare deploys cloud-enabled generator controllers and scheduled resistive load banks to guarantee first-time crank reliability.

DG Set Telemetry Controller and Load Bank Testing
📱

IoT Remote Generator Telemetry & Fuel Monitoring

Modbus RS485 engine controllers streaming real-time RPM, lube oil pressure, water jacket temperatures, cranking battery voltage, and exact fuel volume with automated SMS fuel drop alerts.

24/7 Remote Monitoring • Pilferage Alarms
⚡

Automated Resistive Load Bank Testing

Scheduled full-capacity dummy load testing up to 100% rated kVA to eliminate wet-stacking (unburned fuel accumulation in exhaust manifolds) and ensure engines accept heavy step loads cleanly.

Anti-Wet Stacking • Step-Load Transient Testing

Client Clarifications

Frequently Asked Questions About DG Set Operations

Essential information regarding changeover latency, 'B' check scopes, fuel pilferage defense, and acoustic emission norms.

What is the typical changeover time from grid power failure to diesel generator supply?
Our synchronized AMF panels transfer critical load within 12 to 15 seconds of utility voltage collapse. The electronic engine control unit (ECU) cranks and stabilizes voltage and frequency at 50 Hz within 4 to 6 seconds, followed by automatic motorized circuit breaker closure.
What is included in the standard 'B' Check for a commercial diesel generator?
A 'B' Check is conducted every 250 to 500 operating hours or semi-annually. It includes replacing engine lubricating oil (15W40 CI-4+), replacing primary and secondary fuel filters, lubricating oil filters, bypass filters, and coolant condition filters, alongside cleaning air filter elements and inspecting drive belts and alternator bearings.
How do you monitor diesel fuel levels and prevent pilferage?
We install high-accuracy ultrasonic level transmitters inside day tanks and underground bulk tanks. These sensors transmit continuous volumetric data into our cloud portal, generating instant SMS and email notifications if sudden fuel drops occur during non-operating hours.
What emission and noise standards apply to commercial DG installations?
All maintained generators comply with Central Pollution Control Board (CPCB-IV+) norms. Acoustic enclosures are engineered to suppress sound levels below 75 dB(A) at 1 meter distance, and exhaust stacks are built to statutory height formulas with sample testing ports for annual stack emission certification.

Certified Captive Power Engineering

Ensure Standby Power Reliability With Certified DG Specialists

Connect with our electro-mechanical power specialists for an on-site generator health check, AMF changeover audit, and customized operations & maintenance proposal.

📞
Captive Power Helpdesk +91 9641 64096 (Mon–Sat 9AM–7PM)
✉️
Technical Services Desk info@totalcarefm.com / technical@totalcarefm.com
🏢
National Headquarters DLF Cyber City, Sector 24, Gurugram, Haryana 122002